-
This trombone plays but it’s not pretty. The bell section has some dents, tarnish and finish wear. The tuning slide moves and the logos are missing on the weight. The hand slide moves freely. The inner slide has some tarnish on one sock. The water...4 weeks ago on AmericanlistedTools
-
The Buescher Custom Built Elkhart, Indiana. The slide is marked Buescher True-tone 320615 LP and 408. The bell is nicely engraved. This trombone will play but it has a good size dent around the 4th position. I can’t pull the slide any farther than...4 weeks ago on AmericanlistedTools
-
This horn is missing 2 valve pistons. The #3 piston is there but missing parts. The horn has some dents and the finish is ok. No Mouthpiece, The case is ok but the hinges are bent. Please look at the pictures. Domestic Shipping will be via UPS Gro...Over 4 weeks ago on AmericanlistedTools
-
This Bb Marching French Horn plays and sounds good. It’s 18” long and the bell is 10” in diameter. The valves move smoothly and the tuning slides move freely. The horn has a some smaller dents and some finish wear as pictured. A couple of joints h...Over 4 weeks ago on AmericanlistedTools
-
This brass Yamaha YHR-302M Marching Bb French Horn plays and sounds good. The valves move smoothly. The #3 tuning slide is stuck and the others move freely. It’s 18” long and the bell is 10 1/8” in diameter. It has a few dents on the bow, bell fla...Over 4 weeks ago on AmericanlistedTools
-
This horn plays and sounds good. The bell is 12” in diameter. The rotors move smoothly and all 4 tuning slides move freely. The horn has dents, tarnish and finish wear a pictured. No Mouthpiece. The oversize Reynolds case has some wear but it’s so...Over 4 weeks ago on AmericanlistedTools
-
This brass Yamaha YHR-302M Marching Bb French Horn plays and sounds good. The valves move smoothly. The main tuning slide is stuck and the others move freely. It’s 18” long and the bell is 10 1/8” in diameter. It has a few dents on the bow and bot...Over 4 weeks ago on AmericanlistedTools
-
This Yamaha YHR-302M Marching Bb French Horn plays and sounds good. The valves move smoothly and all 4 tuning slides move freely with good pop. It’s 18 1/2” long and the bell is 10 1/8” in diameter. It has a few minor dents on the bow and bottom. ...Over 4 weeks ago on AmericanlistedTools
-
This marching baritone will play but it needs repairs. The leadpipe is off. (included) It’s 21” long and the bell is 10”. The valves move smoothly and all 4 tuning slides are stuck. It has lots of dents and scratches as pictured. No holes or patch...Over 4 weeks ago on AmericanlistedTools
-
Vintage The Martin Imperial Trumpet / Cornet with Mouthpiece & Case; ~1960s?
Trumpets · Ottawa, ILHolding up nicely overall, but it shows some wear throughout. Likely needs a thorough polishing and a professional tune-up, new pads, etc. Some of the buttons stick... Hopefully a great piece after professional restoration. Marked with serial numb...Over 4 weeks ago on AmericanlistedTools