Alpine Water Refrigerator Water Filter Fits Whirlpool
Alpine Water Filter Fits Whirlpool 4396841 4396710 - This filter use activated carbon to reduces chlorine taste, odor, sediment, dirt, dust, turbidity, rust, heavy metals and harmful sediments. At the same time, does not remove beneficial minerals. - Fits Whirlpool Water Filter : Whirlpool, Kitchen Aid, Kenmore, Amana, Maytag, and Jenn-Air side-by-side refrigerators. - Its comparable with the following part numbers: Every Drop 4396710P 8212650 T2RFWG2 EDR3RXD(phone) T2WG2L PUR 4396841 9030 W10121145 W10186667 4396841B P2RFWG2 W10121146 Whirlpool 4396841P PBSS W(phone)T T1RFKB1 - Comes from an ISO 9001 facility, is built with WQA Golden Certified parts. - Product life depends on water quality and level of contaminants will last use 3-6 mons or 500-750 gallons NOTE: REMEMBER TO RESET THE SYSTEM AFTER CHANGING THE FILTER. Installation and troubleshooting tips: If the defrost drain is frozen, the water will overflow the drain trough and drip down to the bottom of the compartment. Check the defrost drain to determine if it is clogged or frozen. If the defrost drain is frozen, thaw the ice. In addition, flush the drain with hot water to ensure that it is clear of debris. The water inlet valve opens to supply water to the dispenser and ice maker. If the water inlet valve is cracked or has a loose fitting, water will leak from the valve. Inspect the water inlet valve for cracks, and make sure that it is tightly secured to the water supply line. Inspect the water filter housing for cracks. Replace if cracks are found. The water filter might be not fitted properly on the filter housing. If the water filter is not fitted properly, water may leak from the filter. Remove and reinstall the filter to ensure that it is fitted properly NOTE: REMEMBER TO RESET THE SYSTEM AFTER CHANGING THE FILTER.
October 14 on ListedBuy