ART X-15 Ultrafoot Digital Realtime Effects Control System Pedal
ART X-15 Ultrafoot Digital Realtime Effects Control System PedalIf interested call three 3 six/ 7 O six/ two 6 six O.ART X-15 ULTRAFOOT Digital Real-time Effects Control System. It Performs as a Midi Controller for Rack Processing and/or with any ART Product (Was used to access effect patches in a TC Electronics G-Major). This Unit is in Good used Condition. Cosmetically; the three Digit Display and All LEDs Power up with the Expression Pedals and Foot-Pad Switches Performing as Designed.Any Evidence of Usage will be Visible in the Pics.Included are Two, 25 feet. 5-pin MIDI Cables Along with an A-C Power Adapter!The ART X-15 ULTRAFOOT Works with Many of Today?s Processing Devices; As With Anything Though? Compatibility Research is YOUR responsibility!Description Copied from the ART Website:The X-15 Ultrafoot places MIDI real-time control at your feet in a format that is incredibly easy to use. Since winning the 1992 Music & Sound Most Innovative MIDI Product Award, the Ultrafoot has become 1 of the world's most popular MIDI foot controllers.The X-15 combines MIDI program change commands and real-time control for the ultimate in flexibility with any MIDI controllable product. The 2 expression pedals are built into the unit, avoiding extra cables and clutter. The rugged chassis is sixteen gauge steel, and the composite activator pads provide a dirt-free environment for the switches beneath them for years of reliable use.Program change messages are sent when a numbered pad is pressed. New version 1.07 software incorporates the MMA/JMSC Bank select protocol to access beyond 128 locations. Three modes of preset recall are available: 1-128, 1-200 and 1-255. Bank up and down pads are provided for quick access to any preset location. LED's located above each numbered pad indicate the preset selected within a bank. In Effects Mode the numbered pads to function as MIDI on/off controllers. When used with A R T processors, individual effects can be turned on and off in a preset. These controllers are fully programmable for use with other equipment.From the factory, A R T processors are preprogrammed for ease of use with the X-15. Effect on/off controls, bypass and numerous real time expression controllers are programmed into the processors. NO PROGRAMMING OF THE X-15 IS NECESSARY! Any further controllers are programmed into the processor, not the X-15.The X-15 has 2 operating modes: Preset and Effect modes. In Preset mode, the Bank up and down pads rotate through banks. Bank number is indicated by the 1st two digits in the display. Pressing a numbered pad selects a preset in the bank and sends a MIDI program change message. Presets are indicated by the last digit in the display. Pressing the Mode button places the user in Effect mode. In Effect mode, the Bank up and down pads increment or decrement through presets. The numbered pads are now MIDI controllers. These controllers allow individual effects in A R T processors to be turned on and off. The controller numbers are fully programmable.Since the X-15 is used with many types of MIDI equipment, nearly all of its parameters and controls are programmable. The Expression pedals (factory set for Controllers four and 11) are assignable to any MIDI controller number from one to 127. Each pedal has the ability to send info on independent MIDI channels. The numbered pads are MIDI controllers when in Effect Mode. These controller numbers are programmable to control any MIDI device's effects, provided they are MIDI controllable. Other programmable parameters in the X-15 include: System MIDI channel, Left pedal MIDI channel, Right pedal MIDI channel, Bypass mode, Merger, and Pedal Inter-message delay time.Real-time MIDI control is the ability to change an effect's status without interrupting audio. The X-15 accomplishes real-time control via its 2 expression pedals. These pedals, assigned to an effect parameter, offer amazing flexibility to any processor. Wah effects, volume swells, level adjustment of reverb and delays, and chorus speed can all be controlled with your feet. Fade out an effect while fading up another. The possibilities are endless. Up to 8 real-time controllers can be added to a preset in A R T processors. These are in addition to the on/off controllers already present. A total of eighteen MIDI controllers are available! The X-15 practically allows you to operate an A R T processor as if it were a simple chain of stomp boxes! MIDI control has never been easier or so effective. Combine an X-15 Ultrafoot with an A R T processor, equipped with Performance MIDI, and you've got the most flexible, user friendly MIDI system in the world!PDF User Manual Download:www.artproaudio.com/downloads/manuals/disc_omx15.pdfIf interested call three 3 six/ 7 O six/ two 6 six O.
December 30 2018 on American Listed