FSI D-9000-MIL-2 Blind Fastener Installation Tool Kit
Oklahoma City, OK
FSI D-9000-MIL-2 Blind Fastener Installation KitPT-4000 cordless blind riveterExcess of 3,000 pounds pulling force over more than 3/4" of strokeUtilizing the same battery packs and charger as the PT-3000 riveterStandard PT-4000 pulling head assembly is interchangeable with any of the FSI riveters therefore offering redundancy and reduced spare partsTwo Batteries are included with 1 chargerTypes of rivets installable with the PT-4000 include, but are not limited to, virtually all CherryMax (M7885), Avdel or Cherry Monobolts, Cherry Interlock, Huck Magna-Lok and POP type rivets. The PT-4000 is also capable of installing both 5/32" and 3/16" Blind Bolts (MS90353/54-S/U) with the proper nosepieces (provided in the MIL-1 and MIL-2 kits)PT100MAir motor driven, multiple valve cylinder hydraulic pump assemblyPermits Stroke Control Upon trigger actuation, the tool's nose assembly moves forward as long as the trigger is depressed or until max stroke is reachedJaw assembly, which holds the rivet stem, remains stationary. Trigger movement allows the user to monitor and control the stroke length of the tool it required. Releasing trigger is provided to eject the stem from the nose assembly after the rivet retention, which in pressure relief system insures tool safety and longevity.Comes with a muffler on the air motor which keeps dirt and sand from accidentally entering the tool when being operatedIncluding CherryMax (thru 1/4") (M7885/NAS9300), Cherrylock "A" / Olympic-lok (NAS1400A), Huck SMLS (NAS1900S), Nutplate rivets (Mil-N-25027), POP rivets (Mil-R-24243), Self-Plugging Rivets (MS20600), and Huck or Cherry Blind Bolts (MS90353/54 S or U).The Kit contains the capability to install Huck Magna-lokH (M7885/10) and Cherry Interlock wire draw rivets in 3/16 and 1/4" inch diametersContains the pull-up studs and driving anvils used in conjunction with the hand hydraulic D-700 combination riveter-nutsetter which permit installation of blind nuts (NAS1329/30, / MS 27130/31) in sizes 6-32 thru 3/8-16.D700Acombination riveter-nutsetter which permit installation of blind nutsThe riveter provides over 4,000 pounds of pulling force, and because of its unique two-stage valve system, wrist effort is reduced as the loads increaseThe images are representative of the item(s) you will receive, but are not the actual item(s). The item(s) you receive may differ slightly in condition or appearance from the representative images, but will be substantially the same in terms of their condition, appearance and functionality.
March 28 2018 on American Listed