5 BOURNs 45mm LED slide pot adapter PCB sets for ARP OMNI AXXE AVATAR ODYSSEY

This listing was posted on Americanlisted.

5 BOURNs 45mm LED slide pot adapter PCB sets for ARP OMNI AXXE AVATAR ODYSSEY

Location:

New Hartford, CT

Description:

Item Description: For sale today is a set of five adapter board sets that convert new Bourns 45mm LED slide pots to fit the footprint of the old CTS POTs used in ARP synthesizers. These will work in the OMNI, AXXE, AVATAR, ODYSSEY, PRO SOLOIST, PRODGX, and SEQUENCER. The first picture is of one of the actual adapter board sets. The next three are the assembled adapter and the adapters installed on OMNI boards (OMNI boards not included). The adapters will come with assembly instructions. These adapter boards are RoHS compliant for international sales. US sales will get the regular tin/lead boards.Additional parts are required to complete the 5 slide POT adapters (including the new POTs) as listed below: QTYManufacturer P/NDescriptionNotes 1061134-30.110 FASTON TabTwo per adapter 16130XXXXXX40 pin Breakaway Header, 0.1 spacing, 0.1 insulatorThe header has 40 pins,only need 3 pins per adapter The number of adapters and the types of pots required for each model of synthesizer is in the fourth picture. Remember there are 5 adapters per set in this listing.The Bourns slide POTS required are also not included and are available with various colored LEDs. The LEDs are interchangeable and can be replaced by similar LEDs available on EBAY in auction number 12177XXXXXX. Just search for the number...The Bourns slide POT part numbers are listed below. The POTs may not be available exactly as listed due to LED color or detent: 1K LinearPTL45-15X0-102B2 10K LinearPTL45-15X0-103B2 100K LinearPTL45-15X0-104B2 100K AudioPTL45-15X0-104A2 1Meg AudioPTL45-15X0-105A2 Where the X is color, R=Red, A=Amber, O=Orange, W=White, G=GreenThe 0 after the X (color) is for no center detent. Change to a 1 for a center detent.The main adapter board has two pads for the LED on the slide POT marked LED (+) and (-). LEDs of the same color can be connected in series by connecting the (-) on the first LED in the string to the (+) on the next and so on. Add up the forward voltage of each LED and subtract from the supply (usually 15V and 0V or 15V and -15V. Then for 5mA for example, the resistor needed is the remaining voltage divided by 0.005A. This method of driving the LEDs insures that all of the LEDs (of the same color) get the same current and it also reduces the burden on the power supply vs driving the LEDs in parallel. I also have a driver board available that can drive up to four strings of LEDs. This gives you independent control of the current (brightness) of the LED strings. I have listed the driver board for the LEDs at https://www.ebay.com/itm/15532XXXXXX.The slide POTs are available at Mouser, Digi Key and other vendors for about $2.95 eachPayPal Confirmed Address: PayPal address must be confirmed and must be the same as the shipping address.Returns: All items are sold as-is unless otherwise stated. Returns: Not accepted for this partFeedback: Feedback is important to me, please email or contact me with any concerns, issues or problems before leaving feedback and give me the opportunity to work things out if needed. I always leave positive feedback after receiving feedback from the buyer, that way I know the buyer is happy and the transaction is complete. Shipping: Shipping is to USA and international. International shipping is through EBAY and is not free.

Category:

Musical Instruments

Color:

Orange

Posted:

January 28 on Americanlisted